Ford 7.3L
Truck Pulling/Drag Racing
Engine Components
Arias
Forged Pistons
These pistons
are forged which makes for a stronger
piston. The top ring land has been lowered to allow for deeper valve
relief. Stock compression ratio has been maintained, but can be machined to
lower the compression. Includes spiral lock wrist pin retainers. 1
Set: $1,800.00
Ceramic
and Teflon Coat Pistons:
1 Set: $376.00
ATI SFI
Dampener with Serpentine Drive
Match
Balanced: $625.00
Customer has Balanced: $513.00
Stock Rods Head Treated: Heat treat, bead blasted, new bolts, & burnished bushings 50% stronger. 1 Set: $1,200.00 includes exchange for 8 forged rods
Billet
Rods
We use the same
proven technology to make these
rods as used in the tractor pulling engines. These
engines make upwards of 2500hp. Includes high
strength rod bolts and burnished wrist pin bushings.
1 Set: $2,100.00
Girdle
Our girdles are
designed to tie the main caps into the
pan rails to achieve optimum strength. We use 7075
aircraft aluminum and studs using H-11 steel.
Includes: studs, bolts, & remote mount oil filter.
$2,700.00
Main
Studs 1 Set:
$391.00
Coated Rod
Bearings 1 Set:
$220.00
Coated Main
Bearings 1 Set:
$220.00
CYLINDER HEAD
& VALVE TRAIN
COMPONENTS
Mechanical
Roller Lifters 1
Set: $496.00
Roller
Rockers:
Replaces the stamped steel rocker
with no modifications. 1 Set: $1,500.00
Pushrods: Hi
strength 3/8" diameter chromoloy.
1 Set: $230.00
Head
Gaskets Cut Out for Fire Rings:
1 Set:
$125.00
Cometic
Head Gaskets:
1 Set: $300.00
Fire Rings (block must be machined to accept rings) 1 Set: $72.00
Head
Studs: Our head
studs are made from H-11
material. Same material used on the Top Fuel
Dragster engines. 1 Set: $770.00
Valve
Spring Kit:
Includes drop in springs, retainers, keepers, & shims. Stock 76psi seat
pressure new 145 1 Set: $580.00
Stage 1
Head 10% Flow Increase Over Stock:
Includes ports ported & polished, valve springs,
keepers, retainers, & performance valve job.
2 Heads: $1600.00 Customer supplies good heads & valves for Core
Stage 2
Heads 30% Flow Increase Over Stock:
Includes ports ported & polished on flow bench, valve springs, keepers,
retainers, & performance valve job. 2 Heads: $3800.00 Customer
supplies good heads & valves for core.
Stage 3
Heads 54% Flow Increase Over Stock:
Includes ports ported & polished on flow bench, valve springs, keepers,
retainers, Inconel valves, performance valve job. Requires .205" valve relief
with stock camshaft. 2 Heads: $5,000 Customer supplies good heads & valves for
core
Camshafts Reground:
Customer must have a good
core. $550.00
Glow
Plugs "Dummy":
1 Set: $160.00
Intake
Manifolds Cast Aluminum:
1 Set: $370.00
Fuel System
High Pressure
Stealth Oil Pump:
$2,312.00
Electric
Fuel Supply Pump Assm. & Plumbing:
$690.00
Mechanical Fuel Supply Pump Assm. 4GPM 120
PSI: $950.00
Plumbing
from Tank to Fuel Supply Pump:
$370.00
Fuel
Pressure Regulator & Plumbing:
$540.00
Oil
Equalization Line Between Cylinder Heads:
$75.00
*Prices subject to change w/out notice*
